Turn Threading
This operation is performed to machine threads on the part. Threads are used as fasteners for assembly purposes. OD and ID threads can be programmed using this method.
The Threading toolpath method is invoked by selecting the Program tab, clicking on the Turning button in the Machining Browser and selecting the Threading operation.  Turn Threading Menu Item |
This section describes the various parameters that you can set to execute this machining operation. The dialog that is invoked when you choose this toolpath method is shown below: This dialog has five tabs. Each tab defines a set of parameters that you can specify. The sections below describe them in detail.  Dialog Box: Thread Parameters tab, Turn Threading |