|
<< Click to Display Table of Contents >> Navigation: ART Module (AMS) > Welcome > Work flow |
Once the part is loaded, the typical work flow is reflected in the layout of the tabs of the ART Browser window. The work flow is designed to allow you to work from either the Relief Operation tab or Raster to Vector tab. As each tab is accessed, a toolbar with functions specific to the tab chosen will be displayed just below the tab. The functions in each of the toolbars corresponding to each tab are also best accessed in order from left to right.
Thus you typically would start with either the Relief Operations tab or the Raster to Vector tab and access each of the buttons, optionally, in the toolbar that appears when either of these tabs is selected in sequence from left to right. Once the setup functions are completed, you will then proceed to the Relief Operations to commence programming the part. Once relief operations or raster to vector operations are completed you can export the meshes or curves to CAD.
Step 1: Relief Operations tab or Raster to Vector tab
Create project, create curves, load shape library, import ART 1.0 file or modify preferences
Create Relief Operations, align native geometry, move selections to origin or convert native geometry
Export relief operations meshes to CAD
Export vector operations curves to CAD