Groove Finishing
This operation is used to finish the grooves. This operation is performed after the Groove Roughing operation. Groove Finishing can be of 3 types: OD, ID, and Front Facing.
Turning Operations
|
The Groove Finishing toolpath method is invoked by selecting the Program tab, clicking on the Turning button in the Machining Browser and selecting the Groove Finishing operation.  Turn Groove Finishing Menu Item |
This section describes the various parameters that you can set to execute this machining operation. The dialog that is invoked when you choose this toolpath method is shown below: This dialog has six tabs. Each tab defines a set of parameters that you can specify. The sections below describe them in detail.  Dialog Box: Turn Groove Finishing |